Hardware features: IGMG-P83244GC+-D4G is a breakthrough IoT M2M industrial grade gateway which is a combination of a powerful hardware and software capabilities. It uses dual core ARMv7 Cortex-A9 CPU with operating speed up to 1.3 GHz. Supporting multiple I/O it has integrated 8-port (4+4 Combo for copper and fiber) Gigabit Ethernet switch including 6 LAN and 2 WAN ports. Additionally there are two serial ports for RS-232/422/485 and RS-422/485 communication standards. All gateway’s ports support Modbus TCP and RTU protocols for connection with Ethernet and serial end-devices like PLCs, machines and sensors at factory floor, providing possibilities of monitoring and controlling them. IGMG-P83244GC+-D4G has successfully passed 4G LTE connectivity tests with AT&T® and is certified to operate in this carrier’s network. With telecom certification and dual SIM card support for redundant or load balance function it can provide the highest reliability level for cellular connectivity. Thanks to built-in mSATA SSD storage with 64GB capacity (optionally up to 256GB) provides capabilities for huge IoT data logging. Rugged and yet fanless design for -40 to +75°C degrees of operating temperature range makes IGMG-P83244GC+-D4G a perfect solution for industrial applications.
Software features: IGMG-P83244GC+-D4G introduces cutting edge features and defines new standards for IoT gateways market. Thanks to ORing branded Open Gateway software feature it simplifies to maximum IoT solution deployment. Connecting big variety of end-devices, very often with different communication interfaces, to different cloud platforms has never been so easy. Open Gateway protocol converter from a very simple and user-friendly web-based configuration interface turns the gateway into a transparent man in the middle between Modbus field devices and MQTT/CoAP/LWM2M servers.
Built-in Node-RED free open source programming tool software, which can be activated from IGMG-P83244GC+-D4G web interface with just single button click, provides useful and powerful flow-based development features. Browser-based editor makes it easy to wire together data flows using the wide range of nodes in the palette, at the same time providing a capability for rapid Dashboard prototyping including basic user interface components.
The most powerful feature of the IGMG-P83244GC+-D4G gateway is the Ignition SCADA software installed on-board. Ignition, designed by Inductive Automation, is a web-deployed industrial application platform for HMI/SCADA/IIoT that’s been deployed in more than 100 countries. Ignition provides unlimited licensing and open-standards connectivity. Thanks to the user-friendly and easy-to-learn dashboard designer including an impressive number of standard and customized components Ignition provides powerful visualization tools for displaying, controlling, alarming, historian, and reporting. IGMG-P83244GC+-D4G supports both Ignition and Ignition Edge. Depending on application needs, either can be easily chosen and activated by the user from the gateway’s web interface. As the IGMG-P83244GC+-D4G gateway provides SSD storage for massive data collecting, it also includes integrated PostgreSQL Database, which by default is already connected with Ignition software. Users do not have to worry about additional software installation and configuration, as the gateway is ready out of the box.
Both Ignition versions by default run in a trial mode, which means a new user can easily learn how to use the software and test it before deploying it in the real system. The following table explains the differences between Ignition and Ignition Edge.
實體連接埠 | |
---|---|
10/100/1000Base-T(X) RJ45連接埠 | 4 |
行動網路介面 | |
---|---|
SIM卡插槽 | 2 |
頻段選擇 | America(US) LTE: 700/1700/2100/ MHz UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+: 800/850/1900/2100 MHz GSM/GPRS/EDGE: 850/900/1800/1900 MHz Europe(EU) LTE: FDD:2100(B1)/1800(B3)/2600(B7)/900(B8)/800(B20) MHz TDD:TDD:2600(B38)/2300(B40)/2500(B41) MHz UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+: 2100(B1)/900(B8) MHz GSM/GPRS/EDGE: 900/850 MHz |
LED 指示燈 | |
---|---|
訊號強度指示燈 | 3 x LEDs Green for Strength: 130% 75% |
串列 TX/RX 指示燈 | Red : Receiving data Green : Transmitting data |
儲存指示燈 | Green Blinking : Data access |
環狀主控指示燈 (R.M.) | Reserved |
O-Ring 指示燈 (Ring) | Reserved |
故障指示燈(Fault) | Power failure or port disconnected |
電源 | |
---|---|
耗電量(一般) | 18 Watts |
接頭 | Terminal Block x 1 (Port 1), DB9 male x 1 (Port 2) |
電源輸入 | Dual DC inputs. 12-48VDC on 6-pin terminal block |
過載保護 | Present |
反極性保護 | Present |
串列介面 | |
---|---|
接頭 | Terminal Block x 1 (Port 1), DB9 male x 1 (Port 2) |
操作模式 | Port 1 : RS-422/RS-485(2W/4W), Which can be configured by utility Port 2 : RS-232/RS-422/RS-485(2W/4W). Which can be configured by utility |
串列鮑率 | 110 bps to 921.6 Kbps |
資料位元 | 7, 8 |
奇偶檢查位元 | odd, even, none, mark, space |
停止位元 | 1, 1.5, 2 |
流量控制 | RS-232 : TxD, RxD, DCD, RTS, CTS, DSR, DTR, RI, GND RS-422 : TX+, TX-, RX+, RX-, GND RS-485 (2W): D+, DRS- 485 (4W): TX+, TX-, RX+, RX-, GND |
保護 / 認證 | |
---|---|
安全性 | EN60950-1 |
物理特性 | |
---|---|
外殼 | IP-30 |
Dimensions (mm) | 116.4mm W x 170mm D x 154mm H (4.6" W x 6.7" D x 6.1" H) |
重量(克) | 2400 g |
I/O Interface | |
---|---|
接頭 | Terminal Block x 1 (Port 1), DB9 male x 1 (Port 2) |
故障接觸 | |
---|---|
繼電器 | Relay output to carry capacity of 1A at 24VDC |
環境條件 | |
---|---|
儲存溫度 | -40 to 85℃ (-40 to 185℉) |
作業溫度 | -40 to 75℃ (-40 to 167℉) |
作業濕度 | 5% to 95% Non-condensing |
保固 | |
---|---|
保固 | 5 years |
下載 |
|
---|
安規 | ||
---|---|---|
EMC | CE EMC (EN 55024, EN 55032), FCC Part 15 B | |
EMI | EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3,FCC Part 15 B class A | |
EMS | EN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8 (PFMF), IEC/EN61000-4-11(DIP)) | |
震動 | IEC60068-2-27 | |
自由落體 | IEC60068-2-31 | |
振動 | IEC60068-2-6 | |
安全性 | EN60950-1 | |
MTBF | 140345.5955 hrs |
三視圖 |
---|