IGS-3032GC is a full gigabit managed Redundant Ring Ethernet switch with 3x10/100/1000Base-T(X) and 2xGigabit combo ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 20ms over 250 units of connection), Open-Ring, and MSTP/RSTP:2004/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGS-3032GC can be managed centralized and convenient by a powerful windows utility — Open-Vision. The redundant DC power inputs guarantee a non-stop operation. The backup power input will take over immediately when the primary DC power input fails. IGC-3032GC provides relay outputs that can be set up to indicate events with urgency to notify or warn the technicians, so they can quickly respond to the message in priority. Therefore, the switch is one of the most reliablechoice for highly-managed and Fiber Ethernet application.
*NOTE: This function is available by request only
Physical ports | |
---|---|
10/100/1000Base-T(X) ports in RJ45 | 3 |
Gigabit Combo ports with 10/100/1000Base-T(X) RJ45 and 100/1000Base-X SFP ports | 2 |
RS-232 Serial Console port | RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1 |
LED Indicators | |
---|---|
Power Indicator (Power) | Green: Power LED x 3 |
Ring Master Indicator (R.M.) | Green: Indicates that the system is operating in O-Ring Master mode |
O-Ring Indicator (Ring) | Green: Indicates that the system operating in O-Ring mode Green Blinking: Indicates that the Ring is broken. |
Fault Indicator (Fault) | Amber: Indicate unexpected event occurred |
10/100/1000Base-T(X) RJ45 port indicator | Green for port Link/Act. Amber for 100Mbps indicator |
100/1000Base-X SFP Port With Combo Port Indicator | Green for Link/Act indicator: On for link-up, Off for link-down, Blinking for act. |
Power | |
---|---|
Power consumption (Typ.) | 10 Watts |
Redundant Input power | Triple DC inputs. +12~48VDC or -12~48VDC on 7-pin terminal block, 12 ~ 45VDC on power jack |
Overload current protection | Present |
Reverse polarity protection | Present on terminal block |
Protection / Certification | |
---|---|
Safety | IEC/EN 62368-1 |
Physical Characteristic | |
---|---|
Enclosure | IP-30 Aluminum |
Weight (g) | 820 g |
Technology | |
---|---|
Ethernet Standards | IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3z for 1000Base-X IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol) IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) |
MAC Table | 8K |
Packet buffer Size | 1Mb |
Priority Queues | 4 |
Processing | Store-and-Forward |
Switch Properties | Switching latency: 7 us Switching bandwidth: 10 Gbps Max. Number of Available VLANs: 4096 IGMP multicast groups: 1024 Port rate limiting: User Define |
Security Features | Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q) to segregate and secure network traffic Supports Q-in-Q VLAN for performance & security to expand the VLAN space Radius centralized password management SNMP V1/V2c/V3 encrypted authentication and access security |
Software Features | STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging and GVRP supported IGMP Snooping for multicast filtering Port configuration, status, statistics, monitoring, security SNTP for synchronizing of clocks over network Support PTP Client (Precision Time Protocol) clock synchronization DHCP Server / Client support Port Trunk support MVR (Multicast VLAN Registration) support Modbus TCP |
Network Redundancy | O-Ring O-Chain MRP MSTP/RSTP/STP |
Warning / Monitoring System | Relay output for fault event alarming Syslog server / client to record and view events Include SMTP for event warning notification via email Event selection support |
Fault contact | |
---|---|
Relay | Relay output to carry capacity of 1A at 24VDC |
Reset Function | |
---|---|
Reset Button | 5 sec: Factory default |
Environmental | |
---|---|
Storage Temperature | -40 to 85℃ (-40 to 185℉) |
Operating Temperature | -40 to 70℃ (-40 to 158℉) |
Operating Humidity | 5% to 95% Non-condensing |
Warranty | |
---|---|
Warranty | 5 years |
Regulatory Approvals | ||
---|---|---|
EMC | CE EMC (EN 55035, EN 55032), FCC Part 15 B | |
EMI | EN 55032, EN 61000-6-4, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A | |
EMS | EN 55035 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP)) | |
Shock | IEC60068-2-27 | |
Free Fall | IEC60068-2-31 | |
Vibration | IEC60068-2-6 | |
Safety | IEC/EN 62368-1 | |
Other | EN 50155 | |
MTBF | 601791 hrs. |
Dimensions |
---|