ad banner 1122ORing offers a comprehensive portfolio of rugged industrial Ethernet switches, from cost-effective unmanaged and PoE models to advanced Layer 2/3 managed switches enabling precise control. Our switches can address connectivity needs in a variety of vertical markets.

IES-2042FX-MM-SC

IES-2042FX-MM-SC

4FE + 2 SC Multi-mode Lite-Managed Ethernet Switch

-40_75c.pngdc_power_12-48v.pngo-chain.pngo-ring.pngpwr_redundant.png

Description

IES-2060/2042FX series are lite-Managed Redundant Ring Ethernet switches with 6x10/100Base-T(X) ports or 4x10/100Base-T(X) and 2x100Base-FX ports.  With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), O-Chain and STP/RSTP (IEEE802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.  IES-2060/2042FX series can be managed centralized and convenient by a powerful windows utility — Open-Vision.  In addition, the wide operating temperature range from -40oC to 75oC can satisfy most of operating environment.  Therefore, these switches are one of the most reliable choice for easy managed Fiber Ethernet application.

Features

  • Fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250 units of connection)
  •  O-Chain support the multiple redundant ring technology
  •  Multiple Redundant Ethernet technology RSTP/STP, O-Ring supported to protect your industrial network
  •  Provides Fast recovery technology for Ethernet multi-redundancy
  •  SNMP v1/v2c/v3 ,http server, telnet server support
  •  Supports LLDP protocol
  •  Configurable by Web-based and Windows utility (Open-Vision)
  •  Event notification through Syslog, Email, and SNMP trap
  •  Two 100Base-FX fiber ports support for long distance connection
  •  Rigid IP-30 housing design
  •  DIN-Rail and wall mounting enabled

IES-2042FX-MM-SC
Industrial 6-port lite-managed Ethernet switch with 4x10/100Base-T(X) and 2x100Base-FX, multi-mode, 2Km/1310nm, SC connector

IES-2042FX-SS-SC
Industrial 6-port lite-managed Ethernet switch with 4x10/100Base-T(X) and 2x100Base-FX, single-mode, 30Km/1310nm, SC connector

Physical ports

100Base-FX Fiber Ports2
10/100Base-T(X) ports in RJ454
Reset1

LED Indicators

100Base-FX Fiber port IndicatorGreen for Link/Act indicator: On for link-up, Off for link-down, Blinking for act.
Amber for Link indicator: On for link-up, Off for link-down.
Power Indicator (Power)Green: Power LED x 3
Ring Master Indicator (R.M.)Green: Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)Green: Indicates that the system operating in O-Ring mode
Green Blinking: Indicates that the Ring is broken.
Fault Indicator (Fault)Amber: Indicate unexpected event occurred
10/100Base-T(X) RJ45 Port IndicatorGreen for Link/Act indicator: On for link-up, Off for link-down, Blinking for act.
Amber for Link indicator: On for link-up, Off for link-down.

Power

Power consumption (Typ.)7 Watts
ConnectorTerminal Block
Redundant Input powerTriple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack
Overload current protectionPresent
Reverse polarity protectionPresent on terminal block

Protection / Certification

SafetyIEC/EN 62368-1 (LVD), UL 61010-1, UL 61010-2-201

Physical Characteristic

EnclosureIP-30 Aluminum
Dimensions (mm)54.2 (W) x 107.1 (D) x 145.4 (H)mm
2.13 (W) x 4.22 (D) x 5.72 (H) inch
Weight (g)670 g

Technology

Ethernet StandardsIEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table1K
Packet buffer Size1Mb
Priority Queues4
ProcessingStore-and-Forward
Switch PropertiesSwitching latency: 5.05 µs
Switching bandwidth: 1.2Gbps
Throughput (packet per second): 892.8Kpps@64Bytes packet
VLAN: Port based
Security FeaturesEnable/disable ports
VLAN to segregate and secure network traffic
Software FeaturesSTP/RSTP (IEEE 802.1D/w)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
DHCP Client
Port Base VLAN
LLDP (Link Layer Discovery Protocol)
Port configuration, status, statistics, monitoring, security
SNMP v1/v2c/v3 and private MIB support
Network RedundancyO-Ring
O-Chain
Fast recovery
RSTP/STP
Warning / Monitoring SystemRelay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support

Fixed Fiber Ports Number

Fiber Ports Standard100Base-FX
Fiber ModeMulti-mode
Fiber Diameter (μm)62.5/125 µm, 50/125 µm
Fiber Optical ConnectorSC
Typical Distance (km)2 Km
Wavelength (nm)1310 nm
Max. Output Optical Power (dBm)-14 dBm
Min. Output Optical Power (dBm)-23.5 dBm
Max. Input Optical Power (Saturation)(dbm)0 dBm
Min. Input Optical Power (Saturation)(dBm)-31 dBm
Link Budget (dB)7.5 dB

Fault contact

RelayRelay output to carry capacity of 1A at 24VDC

Reset Function

Reset ButtonLess than 5 sec: System reboot
More than the 5 sec: Factory default

Environmental

Storage Temperature-40 to 85℃ (-40 to 185℉)
Operating Temperature-40 to 75℃ (-40 to 167℉)
Operating Humidity5% to 95% Non-condensing

Warranty

Warranty5 years

Downloads

FirmwareVersionRelease DateSize
IES-2042FX-MM-SC FirmwareJuly 06, 2023

UserManualVersionRelease DateSize
IES-2042FX-MM-SC User ManualJuly 06, 2023

DatasheetVersionRelease DateSize
IES-2042FX-MM-SC DatasheetJuly 06, 2023

QIGVersionRelease DateSize
IES-2042FX-MM-SC Quick Installation GuideJuly 06, 2023

Regulatory Approvals

EMCCE EMC (EN 55035, EN 55032), FCC Part 15 B
EMIEN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, VCCI class A, C-Tick class A, FCC Part 15 B class A
EMSEN 55035 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP))
ShockIEC60068-2-27
Free FallIEC60068-2-31
VibrationIEC60068-2-6
SafetyIEC/EN 62368-1 (LVD), UL 61010-1, UL 61010-2-201
MTBF595597.3384 hrs.

Dimensions